Vision Operator’s Manual (v12.0 MD) Switcher Basics • Ops 4–43
• Press Copy on the Copy Keyers Menu to perform the copy.
• Press Swap on the Copy Keyers Menu to perform the swap.
This completes the procedure for copying or swapping the contents of a keyer to another.
Swap Keyer
The Key Swap function allows you to swap the entire contents of a keyer with another keyer, on
the same or a different MLE.
Use the following procedure to swap a Keyer:
1. Press and hold any SEL button on the Effects Keyers Module for the keyer that you
want to swap.
2. Press the KEYX button on the Transition Module of the second Keyer. This can be the
same MLE or a different MLE. The button that you select is the Keyer that is swapped.
3. Release both buttons. Both selected Keyers swap their contents.
This completes the procedure for performing a swap of the Keyers.
To Next Page
Loading...
