Vision Operator’s Manual (v12.0 MD) Wipes, Patterns, Washes, and Mattes • Ops 6–13
7. Adjust the colors of the wash as follows:
• Press Modify Color 1 on the Modify Wash Menu. You can switch between
Color 1 and Color 2 on the Color Selection Menu.
Wash Color 2 — Color Selection Menu
Note — If the Matte Limit feature is active, the RGB color space is not available. You will only
be able to make color selection in the HSL color space. Refer to the section “Personality List”
on page Eng 11-2 for more information.
• Select the color you want to use for Color 1 using the knobs, positioner, or by
selecting a point on the Color Wheel.
• Toggle Color on the Color Selection Menu to 2.
• Select the color you want to use for Color 2 using the knobs, positioner, or by
selecting a point on the Color Wheel.
8. The wash effect is now stored for the selected Wash button on the current MLE.
This completes the procedure for creating a wash.
Creating Mattes
To fill a border, color background, or a pattern with a matte, you must first set up the border, or
preset pattern, that you want to apply the matte to. A matte is like a wash, but has only one color.
Use the following procedure to create a matte color:
1. Press Matte on the Mattes Selection Menu.
2. Press Modify Color on the Mattes Selection Menu.
Matte — Color Selection Menu
To Next Page
Loading...
