Ops 6–14 • Wipes, Patterns, Washes, and Mattes Vision Operator’s Manual (v12.0 MD)
Note — If the Matte Limit feature is active, the RGB color space is not available. You will only
be able to make color selection in the HSL color space. Refer to the section “Personality List”
on page Eng 11-2 for more information.
3. Select the color you want to use for Color 1 using the knobs, positioner, or by selecting
a point on the Color Wheel.
This completes the procedure for creating a matte color.
To Next Page
Loading...
