Ops 16–6 • Lighting & Preprocessor Effects Vision Operator’s Manual (v12.0 MD)
Mosaic
The Mosaic effect transforms the image on the channel into an arrangement of tiles. The size of
the tiles can be adjusted both horizontally and vertically.
Use the following procedure to apply a mosaic effect to a channel:
1. Press the SEL button on the Keyers Module for the Keyer that you want to apply
preprocessor effect to the channel for. The S&T MD Position/Crop Menu 1-2 is
displayed. The key must already be flying.
2. Press the DVE quick navigation button to display the S&T MD Main Menu 1-2.
3. Press Preprocessor on the S&T MD Main Menu 1-2.
4. Toggle Mosaic on the S&T MD Preprocessor Menu to On to apply this effect.
Mosaic — S&T MD Preprocessor Menu
5. Use the Horiz. Tiles knob on the S&T MD Preprocessor Menu, or positioner, to
adjust the size, in pixels, of horizontal tiles.
6. Use the Vert. Tiles knob on the S&T MD Preprocessor Menu, or positioner, to adjust
the size, in pixels, of vertical tiles.
7. Use the Overall knob on the S&T MD Preprocessor Menu, or positioner, to adjust the
size, in pixels, of horizontal and vertical tiles.
This completes the procedure for applying a mosaic effect to a channel.
Posterize
The Posterize effect adjusts the amount of luminance and chrominance ranges of the image on the
channel.
Use the following procedure to apply a posterization effect to a channel:
1. Press the SEL button on the Keyers Module for the Keyer that you want to apply
preprocessor effect to the channel for. The S&T MD Position/Crop Menu 1-2 is
displayed. The key must already be flying.
2. Press the DVE quick navigation button to display the S&T MD Main Menu 1-2.
3. Press Preprocessor on the S&T MD Main Menu 1-2.
4. Toggle Posterize on the S&T MD Preprocessor Menu to On to apply this effect.
To Next Page
Loading...
