Vision Operator’s Manual (v12.0 MD) Wipes, Patterns, Washes, and Mattes • Ops 6–7
Pattern Rotation Menu
•Use the Degrees knob on the Pattern Rotation Menu to adjust the rotation of the
pattern.
This completes the procedure for adjusting the rotation of a pattern.
Border Size and Softness
The Pattern Border and Softness and Size features allows you to apply borders to the pattern, and
soften the borders and edges of the pattern.
Note — You cannot apply a Pattern Border and an XFX Border to the same key. You must turn
off the XFX Border in order to be able to turn on the Pattern Border. The Pattern Border turns off
automatically when you apply an XFX Border.
Use the following procedure to adjust the border and softness of a pattern:
1. Press Size/Soft/Border on the Pattern Parameters Menu 1-2.
Border/Softness — Pattern Parameters Menu 1-2
2. Use the Border knob on the Pattern Parameters Menu 1-2 to adjust the size of the
border on the pattern. A Border of 0.0% turns the border effect off.
3. Use the Softness knob on the Pattern Parameters Menu 1-2 to adjust the softness of
the border or edge of the pattern. If there is no border applied, the softness is applied to
the edges if the pattern.
Note — If you are adjusting a Preset Pattern key, the Size knob allows you to adjust the size
of the pattern. Size does not apply to a pattern that is being used for a transition.
To Next Page
Loading...
