Ops 6–6 • Wipes, Patterns, Washes, and Mattes Vision Operator’s Manual (v12.0 MD)
2. Toggle Rotation to On on the Pattern Rotation Menu.
3. Apply a continuous rotation to the pattern as follows:
• Press Continuous Rotation on the Pattern Rotation Menu.
Pattern Rotation Menu
•Use the Speed knob on the Pattern Rotation Menu to select the rate at which the
pattern continuously rotates. Selecting a positive value rotates the pattern
clockwise, and selecting a negative value rotates the pattern counter-clockwise.
4. Apply a transitional rotation to the pattern as follows
• Press Transition Rotation on the Pattern Rotation Menu.
Pattern Rotation Menu
•Use the Rotation knob on the Pattern Rotation Menu to select the amount of
rotations of the pattern that occurs during a transition. Selecting a positive value
rotates the pattern clockwise, and selecting a negative value rotates the pattern
counter-clockwise.
5. Apply a fixed rotation to the pattern as follows:
• Press User-Controlled Rotation on the Pattern Rotation Menu.
To Next Page
Loading...
