Vision Operator’s Manual (v12.0 MD) Picture Frame Borders • Ops 14–5
Border Style
The Style feature allows you to change the style of the border that is applied to the channel. You
can select the corner type, and border texture that is applied to the channel. Each style supports
between one and three colors. The current colors of the border are shown in the Color area.
Use the following procedure to adjust the style of the border:
1. Press the SEL button on the Keyers Module for the Keyer that you want to adjust the
border appearance of the channel for. The S&T MD Position/Crop Menu 1-2 is
displayed. The key must already be flying.
2. Press the DVE quick navigation button to display the S&T MD Main Menu 1-2.
3. Press Border on the S&T MD Main Menu 1-2.
4. Press Style on the S&T MD Border Menu.
Style — S&T MD Border Menu
5. Use the Texture knob on the S&T MD Border Menu to select a border texture.
6. Use the Corners knob on the S&T MD Border Menu to select the corner type. A
graphical representation of the corner type is shown on the border in the Size area of the
menu.
This completes the procedure for adjusting the style of the border.
To Next Page
Loading...
