Vision Operator’s Manual (v12.0 MD) Wipes, Patterns, Washes, and Mattes • Ops 6–5
Pattern Parameters
The Pattern Parameters Menus allow you to assign different parameters to the patterns for each
pattern generator on the MLE. This can be for either a Wipe, Preset Pattern, Wash, or Mask.
Aspect
The Aspect feature allows you to alter the aspect ratio of the pattern. For example, circles can be
made into ovals and squares can be made into rectangles.
Use the following procedure to adjust the aspect ratio of a pattern:
1. Toggle Aspect to On on the Pattern Parameters Menu 1-2.
Aspect — Pattern Parameters Menu 1-2
2. Use the Aspect knob on the Pattern Parameters Menu 1-2 to adjust the aspect ratio of
the wipe pattern or preset pattern.
This completes the procedure for adjusting the aspect ratio of a pattern.
Rotation
The Rotation features allows you to set the pattern, or wipe, to a specific angle (User Rotation), or
apply a moving rotation, or spin, to the pattern (Continuous or Transition Rotation).
You can apply multiple rotation types to the same pattern at the same time.
Use the following procedure to adjust the rotation of a pattern:
1. Press Rotation on the Pattern Parameters Menu 1-2.
Pattern Rotation Menu
To Next Page
Loading...
