Ops 17–16 • WARP Effects Vision Operator’s Manual (v12.0 MD)
Magnify WARP
The Magnify WARP creates an area within which the background video, that the WARP is
applied to, is magnified. This WARP can be adjusted for position, shape, borders, and rotation.
Use the following procedure to set up a Magnify WARP:
1. Select and activate the Magnify WARP effect on the keyer you want to apply it.
2. Press Position on the S&T WARP Menu.
Magnify (Position) — S&T WARP Menu
3. Adjust the position of the magnified area as follows:
•Use the X-Position knob on the S&T WARP Menu, or the positioner, to adjust the
horizontal position of the magnified area on screen.
•Use the Y-Position knob on the S&T WARP Menu, or the positioner, to adjust the
vertical position of the magnified area on screen.
•Use the Size knob on the S&T WARP Menu, or the positioner, to adjust the size of
the magnified area.
4. Adjust the shape of the effect as follows:
• Press Shape on the S&T WARP Menu.
Magnify (Shape) — S&T WARP Menu
•Use the Shape knob on the S&T WARP Menu to select the shape of the
magnified area.
•Use the Aspect Ratio knob on the S&T WARP Menu, or the positioner, to adjust
the aspect ratio of the magnified area.
•Use the Magnification knob on the S&T WARP Menu, or the positioner, to
adjust the magnification of the effect.
To Next Page
Loading...
