Vision Operator’s Manual (v12.0 MD) WARP Effects • Ops 17–15
7. Adjust the flare options as follows:
• Press Flare Options on the S&T WARP Menu.
Lens Flare (Flare Options) — S&T WARP Menu
•Use the Aspect knob on the S&T WARP Menu, or the positioner, to adjust the
aspect ratio of the lens flare and light source.
•Use the Flare Type knob on the S&T WARP Menu to select the shape, or type, or
light source for the light source.
•Use the Flares knob on the S&T WARP Menu, or the positioner, to adjust the
number of flares (0 through 4) used in the effect.
This completes the procedure for setting up a Lens Flare WARP.
To Next Page
Loading...
