Ops 17–14 • WARP Effects Vision Operator’s Manual (v12.0 MD)
5. Adjust the position of the lens flares as follows:
• Press Placement on the S&T WARP Menu.
Lens Flare (Placement) — S&T WARP Menu
•Use the Auto-Follow knob on the S&T WARP Menu to turn this feature on or off.
› Off — Select this option to manually adjust the distance that the lens flares are
from the light source.
› On — Select this option to have the switcher automatically adjust the distance
the lens flares are from the light source.
•Use the Angle knob on the S&T WARP Menu, or the positioner, to adjust the
angle of the lens flares compared to the center of the screen.
•Use the Distance knob on the S&T WARP Menu, or the positioner, to adjust the
distance between the lens flares and light source. The Auto-Follow option must be
set to Off.
6. Adjust the color of the effect as follows, including the light source and the lens flares:
• Press Color on the S&T WARP Menu.
Lens Flare (Color) — S&T WARP Menu
•Use the Luminance knob on the S&T WARP Menu, or the positioner, to adjust
the luminance of the effect.
•Use the Saturation knob on the S&T WARP Menu, or the positioner, to adjust the
saturation of the effect.
•Use the Hue knob on the S&T WARP Menu, or the positioner, to adjust the hue of
the effect.
To Next Page
Loading...
