Ops 17–10 • WARP Effects Vision Operator’s Manual (v12.0 MD)
Heart WARP
The Heart WARP places the key video inside a heart shape. As you create the WARP, the heart
shape will shrink down around the key and then it will fly off with the key. The direction and
speed that it moves is determined by the settings. The color of the border of the heart can also be
changed.
Use the following procedure to set up a Heart WARP:
1. Select and activate the Heart WARP effect on the keyer you want to apply it.
2. Press Position on the S&T WARP Menu.
Heart (Position) — S&T WARP Menu
3. Create the heart as follows:
•Use the Size/Creation knob on the S&T WARP Menu, or the positioner, to move
the heart through the path of the WARP.
•Use the X-Pos knob on the S&T WARP Menu, or the positioner, to adjust the
horizontal position of the center point of the heart on screen.
•Use the Y-Pos knob on the S&T WARP Menu, or the positioner, to adjust the
vertical position of the center point of the heart on screen.
4. Adjust the rotation of the effect as follows:
• Press Rotation on the S&T WARP Menu.
Heart (Rotation) — S&T WARP Menu
•Use the X-Rotation knob on the S&T WARP Menu, or the positioner, to adjust
the number of horizontal rotations the heart does along the path of the WARP.
•Use the Y-Rotation knob on the S&T WARP Menu, or the positioner, to adjust
the number of vertical rotations the heart does along the path of the WARP.
To Next Page
Loading...
