Ross Vision - Page 309

Vision Operator’s Manual (v12.0 MD) WARP Effects • Ops 17–11
•Use the Z-Rotation knob on the S&T WARP Menu, or the positioner, to adjust
the number of clockwise, or counter-clockwise, rotations the heart does along the
path of the WARP.
5. Apply a border to the heart as follows:
• Press Border on the S&T WARP Menu.
Heart (Border) — S&T WARP Menu
•Use the Size knob on the S&T WARP Menu, or the positioner, to adjust the size of
the border on the heart.
6. Adjust the color of the border of the heart as follows:
• Press Border Color on the S&T WARP Menu.
Heart (Border Color) — S&T WARP Menu
•Use the Luminance knob on the S&T WARP Menu, or the positioner, to adjust
the luminance of the border color.
•Use the Saturation knob on the S&T WARP Menu, or the positioner, to adjust the
saturation of the border color.
•Use the Hue knob on the S&T WARP Menu, or the positioner, to adjust the hue of
the border color.