Ross Vision - Auxiliary Control Panel Operation

Ops 11–2 • Auxiliary Panels Vision Operator’s Manual (v12.0 MD)
Auxiliary Control Panel Operation
In addition to crosspoint buttons, all Auxiliary Control Panels include dedicated Aux Bank and
Aux Bus buttons, as well as Control buttons (Figure 11.1).
• Crosspoint Buttons — The Crosspoint buttons allow you to select a video source on the
selected bus. If the Auxiliary Control Panel is in Aux Bus mode, the crosspoint buttons
select the video source being fed out of the aux bus.
Operating Tip — Crosspoint buttons can be mapped as AuxKey Cut, or Transition buttons
to perform transition from your Auxiliary Control Panel. Refer to the section “Editing Bus Maps”
on page Eng 7-13 for information on mapping commands to crosspoint buttons.
• Aux Bank and Bus Buttons — The Aux Bank and Aux Bus buttons allow you to select
the specific Aux Bus that you want to assign the Auxiliary Control Panel to.
• Control Buttons — The Control buttons allow you to switch between the operating
modes, and perform various operations when in each mode.
Figure 11.1 Auxiliary Control Panel (24-Button Shown)
Note — The Auxiliary Control Panel must be assigned to an Internal Panel Row for menu
follows and double-press actions to work. Refer to the section “Communications Setup” on
page Eng 14-8 for more information.
The Auxiliary Control Panel allows you to select the video source that is being fed out of any Aux
Buses on the switcher. You can select the Aux Bank and Aux Bus, and the video signal you want
(Figure 11.2).
Operating Tip — (Internal Panel Row Auxiliary Control Panel Only) If the Aux Bus you
are selecting is set up as an AuxKey, you can double-press the Assign button on the Auxiliary
Control Panel to assign the AuxKey to a row on the Vision control panel. The particular panel
row that the AuxKey is assigned to is the panel row that the Auxiliary Control Panel is assigned
to from the Panel Modules Menu.
Figure 11.2 Aux Bus Mode — Auxiliary Control Panel (24-Button Shown)
BANK
1
AUX
1
AUX
2
AUX
3
AUX
4
AUX
5
AUX
6
AUX
7
AUX
8
BANK
2
BANK
3
BANK
4
BANK
5
BANK
6
Control ButtonsAux Bank & Bus Buttons
Crosspoint Buttons
AUX
1
AUX
2
AUX
3
AUX
4
AUX
5
AUX
6
AUX
7
AUX
8
BANK
1
BANK
2
BANK
3
BANK
4
BANK
5
BANK
6
CUST
OM01
CUST
OM02
CUST
OM07
CUST
OM06
CUST
OM05
CUST
OM04
CUST
OM03
CUST
OM08
CUST
OM09
CUST
OM14
CUST
OM13
CUST
OM12
CUST
OM11
CUST
OM10