Vision Operator’s Manual (v12.0 MD) Squeeze & Tease Basic Operation • Ops 12–15
Frontside/Backside Video and S&T Wipes and Sequences
When running a Squeeze & Tease Wipe, or Sequence, any Frontside/Backside and Auto Flip
information contained in the wipe or sequence is not recognized. In order to run
Frontside/Backside and Auto Flip effects with a wipe or sequence, the effects must be applied to
the wipe or sequence when it is loaded.
Note — The Frontside/Backside Video feature cannot be used with background Squeeze &
Tease Wipes.
Use the following procedure to use Frontside/Backside and Auto Flip features in a Squeeze &
Tease Wipe or Sequence:
1. Load the Squeeze & Tease Wipe or Sequence.
2. Navigate to the Channel Management Menu as follows:
• Press CHNL MGMT on the Keyers Module to display the Channel Management
Menu 1-2.
• Press More.
3. Set up the Frontside/Backside and Auto Flip functions as required.
4. Run the Squeeze & Tease Wipe or Sequence. The Squeeze & Tease Wipe or Sequence
will use the selected Frontside/Backside and Auto Flip settings.
This completes the procedure for using the Frontside/Backside and Auto Flip features in a
Squeeze & Tease Wipe or Sequence.
To Next Page
Loading...
