Ross Vision - Defaulting

Ops 13–14 • Position/Crop Functions Vision Operator’s Manual (v12.0 MD)
Defaulting
To return a specific Position/Crop parameter to its default settings, press and hold the indicated
button on the menu, and press the CLEAR button on the Positioner Module.
• Position + CLEAR — Returns the selected channel to the default position (0, 0, 0).
• Rotation + CLEAR — Returns the selected channel to the default rotation (0, 0, 0).
• Pivot Preset + CLEAR — Returns the selected channel to the default pivot preset
(Center).
• Pivot Position + CLEAR — Returns the selected channel to the default pivot position
(0, 0, 0).
• Aspect + CLEAR — Returns the selected channel to the default aspect ration (1, 1, 1)
and turns Aspect off.
• Crop Horizontal + CLEAR — Returns the selected channel to the default horizontal
cropping (0, 0).
• Crop Vertical + CLEAR — Returns the selected channel to the default vertical
cropping (0, 0).
• Transparency + CLEAR — Turns transparency off.
• Freeze + CLEAR — Turns freeze off.
• Spin + CLEAR — Returns the selected channel to the default spin setting.
• Vi
ewpoint + CLEAR — Returns the selected channel to the default viewpoint (0, 0, 0).
• Locate + CLEAR — Returns the selected channel to the default location.
For More Information...
• on using the positioner to default a parameter, refer to the section “Using the Positioner”
on page Ops 4-37.