Ops 9–12 • Still-Store Vision Operator’s Manual (v12.0 MD)
Transferring Stills
Transferring stills and animations from your computer to the switcher is accomplished either by
transferring files using a USB drive, or creating a WebDav, or FTP connection to the switcher.
Once the connections is established, you can transfer files from the computer to the switcher.
Note — The switcher does not show file name extensions. If you have two files with the same
name, in different file formats, you will not be able to tell them apart on the switcher.
Transferring Stills Using WebDAV
The WebDAV protocol is be used to transfer stills to the switcher from a computer. This section
provides information establishing a WebDAV connection to the switcher from a computer
running Windows XP®, Windows 7®, Mac OS® X 10.5, or Linux Fedora 8® operating systems.
For information on establishing a connection from a computer running a different operating
system, refer to the documentation that came with your computer, or contact Ross Video
Technical Support.
Important — Do not use WebDAV to move images or animations around on the switcher. If
you move a file with WebDAV, the associated on-air properties for that image or animation will
be lost.
WebDAV for Microsoft® Windows XP® or 7 Operating System
Use the following procedure to establish a WebDAV connection to the frame:
1. Click My Network Places on the Start Menu to display the My Network Places
window.
2. Click Add a network place under Network Tasks.
3. Select Choose another network location in the Add Network Place Wizard and
click Next.
4. Enter http://switcher_ip/stills/# in the Internet or network address field, and click
Next. The default IP address of the frame is 192.168.1.1.
Note — If you are establishing a WebDAV connection from a computer running Windows 7®
operating system, you do not need the # at the end of the still directory.
5. Enter the user name and password and click OK to connect to the frame. The default
User name is user and Password is password.
6. Enter a new name for the stills directory on the frame is required, and click Next.
7. Click Finish. The stills folder opens in a new window.
This completes the procedure for establishing a WebDAV connection to the frame. You can now
copy images into the stills directory on the switcher. Additional directories can be created on the
switcher, up to 4 cascading sub-directories from the root directory.
WebDAV for Apple® Mac OS® X
Use the following procedure to establish a WebDAV connection to the frame:
To Next Page
Loading...
