Vision Operator’s Manual (v12.0 MD) Wipes, Patterns, Washes, and Mattes • Ops 6–9
Matrix Tile Size
The Matrix Tile Size feature allows you to set the shape of the tiles in the matrix wipe, as well as
the number of tiles used.
Use the following procedure to adjust the tile size of a matrix:
1. Press More B Pattern Options B Matrix Tile Size on the Patterns Menu.
Matrix Tile Size Menu
2. Select the shape of the tiles used in the matrix as follows:
• Square — Press Square on the Matrix Tile Size Menu to use square tiles in the
matrix.
• Tall — Press Tall on the Matrix Tile Size Menu to use rectangular tiles in the
matrix taller than they are wide.
• Wide — Press Wide on the Matrix Tile Size Menu to use rectangular tiles in the
matrix that are wider than they are tall.
3. Use the Size knob on the Matrix Tile Size Menu to select the number of tiles that are
used in the matrix. The available selection depends on the shape of the tile selected.
This completes the procedure for adjusting the tile size of a matrix.
Wipe Modulation
The Wipe Modulation feature allows you to add a ripple effect to the pattern wipe. You can adjust
the height and width of ripples both vertically and horizontally, as well as animate the ripples.
Use the following procedure to adjust the wipe modulation:
1. Press More B Pattern Options B Wipe Modulation on the Patterns Menu.
2. Toggle Modulation to On on the Wipe Modulation Menu.
3. Adjust the ripples on the left and right sides of the pattern as follows:
Operating Tip — Press Clear on the Wipe Modulation Menu to return all the pattern
modulation setting to the default values.
• Press Vertical Params on the Wipe Modulation Menu.
To Next Page
Loading...
