Vision Operator’s Manual (v12.0 MD) Still-Store • Ops 9–13
1. Click Go B Connect to Server... on the Finder Menu to display the Connect to
Server window.
2. Enter http://switcher_ip/stills/ in the Server Address field, and click Connect. The
default IP address of the frame is 192.168.1.1.
3. Enter the name and password and click OK to connect to the frame. The default Name is
user and Password is password. The stills folder appears under SHARED in the
Finder.
This completes the procedure for establishing a WebDAV connection to the frame. You can now
copy images into the stills directory on the switcher. Additional directories can be created on the
switcher, up to 4 cascading sub-directories from the root directory.
WebDAV for Linux Fedora 8®
Use the following procedure to establish a WebDAV connection to the frame:
1. Click Places B Connect to Server on the Menu Bar Panel to display Connect to
Server window.
2. On the Connect to Server window, select the following:
• Service Type: WebDAV (HTTP)
• Server: (The default IP address of the frame is 192.168.1.1)
• Port: leave blank
• Folder: /stills
• Username: (the default user name for the frame is user)
• Name to use for connection: (a descriptive name for the connection, for example
Switcher Stills)
3. Click Connect.
4. Enter the password and click OK to connect to the frame. The default password is
password. The stills folder appears under the Places menu.
This completes the procedure for establishing a WebDAV connection to the frame. You can now
copy images into the stills directory on the switcher. Additional directories can be created on the
switcher, up to 4 cascading sub-directories from the root directory.
Transferring Stills Using FTP
If you are unable to create a WebDAV connection to your switcher, or you are running the
Windows Vista® or Windows 7® operating system, you can create an FTP (File Transfer
Protocol) connection to copy stills and animations to your switcher as follows:
• On your computer, open your File Browser and enter
ftp://user:password@<switcher_ip> in the Address field, and press Enter. The
default IP address of the frame is 192.168.1.1.
You can now copy images into the stills directory on the switcher. Additional directories can be
created on the switcher, up to 4 cascading sub-directories from the root directory.
For More Information...
• on obtaining the IP Address of the switcher, refer to the section “Network Setup” on
page Eng 4-5.
• on the user name and password of the switcher, refer to the section “Vision Web
Interface Account” on page Eng 6-2.
To Next Page
Loading...
