Vision Operator’s Manual (v12.0 MD) Squeeze & Tease Basic Operation • Ops 12–9
In the menu, an R is shown to indicate its orientation.
Image Orientation
Image Centering
The CLEAR button on the Positioner Module is used to reset the image to the default image
settings.
• Press the CLEAR button once to reset the values on the current menu.
• Double-press the CLEAR button to reset all of the image values.
You can also reset specific parameters (for example, Z location) using the CLEAR button and the
F buttons on the touchscreen. Press and hold the Squeeze & Tease parameter you want to default,
and press the CLEAR button on the Positioner Module.
Conclusion
The rest of the chapter discusses the operation of the Squeeze & Tease system. Now that you
understand the basic concepts of how the system works, the best way to learn how to create
specific effects is with some hands-on practice to get a “feel” for the system. Use the positioner to
try different image placements and experiment by changing the pivot point and rotation values. In
the end, your knowledge of position and rotation coordinates will help you manipulate your
images creatively and accurately for repeatable results.
For More Information...
• on Keyers, refer to the section “Keyers Module” on page Ops 7-2.
• on flying keys, refer to the section “Flying Keys” on page Ops 12-10.
• individual centering images, refer to the section “Image Centering” on page Ops 12-9.
To Next Page
Loading...
