Ops 17–12 • WARP Effects Vision Operator’s Manual (v12.0 MD)
7. Adjust the movement speed of the heart through the path as follows:
• Press Movement on the S&T WARP Menu.
Heart (Movement) — S&T WARP Menu
•Use the X-Rate knob on the S&T WARP Menu, or the positioner, to adjust the rate
at which the heart will fly off in the X-Axis.
•Use the Y-Rate knob on the S&T WARP Menu, or the positioner, to adjust the rate
at which the heart will fly off in the Y-Axis.
•Use the Z-Rate knob on the S&T WARP Menu, or the positioner, to adjust the rate
at which the heart will fly off in the Z-Axis.
This completes the procedure for setting up a Heart WARP.
To Next Page
Loading...
