Ops 14–4 • Picture Frame Borders Vision Operator’s Manual (v12.0 MD)
7. Adjust the Border Transparency as follows:
• Press Advanced on the S&T MD Border Menu.
Advanced — S&T MD Border Menu
•Use the Edge Trnsp knob on the S&T MD Border Menu, or the positioner, to
adjust the transparency of the outer and inner edges of the border. As you adjust the
Edge Transparency, the sides of the border profile move up or down.
Operating Tip — If you adjust the Interior Transparency to the same level as the Edge
Transparency, the resulting border is evenly transparent.
•Use the Interior Trnsp knob on the S&T MD Border Menu, or the positioner, to
adjust the transparency of the center of the border. As you adjust the Interior
Transparency, the center of the border profile moves up or down.
This completes the procedure for adjusting the appearance of the border.
To Next Page
Loading...
