Vision Operator’s Manual (v12.0 MD) WARP Effects • Ops 17–25
5. Adjust the appearance of the pixie dust as follows:
• Press Randomness on the S&T WARP Menu.
Pixie Dust (Randomness) — S&T WARP Menu
•Use the Variation knob on the S&T WARP Menu, or the positioner, to adjust the
amount of variation in the random distribution of pixels in the effect. The greater the
variation, the fuzzier the image appears.
•Use the Softening knob on the S&T WARP Menu, or the positioner, to adjust the
amount of softness around the edges of the effect.
•Use the Movement knob on the S&T WARP Menu to select Yes (pixels will
appear to move) or No (image is static) to apply movement to the effect.
This completes the procedure for setting up a Pixie Dust WARP.
To Next Page
Loading...
