Ops 17–6 • WARP Effects Vision Operator’s Manual (v12.0 MD)
7. Adjust the sensitivity of the effect as follows:
• Press Sensitivity on the S&T WARP Menu.
Film (Sensitivity) — S&T WARP Menu
•Use the Red knob on the S&T WARP Menu, or the positioner, to adjust amount of
red in the key video.
•Use the Blue knob on the S&T WARP Menu, or the positioner, to adjust the
amount of blue in the key video.
•Use the Luma Contrast knob on the S&T WARP Menu, or the positioner, to
adjust the luminance and contrast of the key video.
This completes the procedure for setting up a Film WARP.
To Next Page
Loading...
