Ops 17–8 • WARP Effects Vision Operator’s Manual (v12.0 MD)
•Use the Z-Pos knob on the S&T WARP Menu, or the positioner, to adjust the
depth, or size, of the globe.
5. Apply movement to the effect as follows:
• Press Movement on the S&T WARP Menu.
Globe (Movement) — S&T WARP Menu
•Use the X-Rate knob on the S&T WARP Menu, or the positioner, to adjust the
amount of horizontal movement, or rotation, of the globe.
•Use the Y-Rate knob on the S&T WARP Menu, or the positioner, to adjust the
amount of vertical movement, or rotation, of the globe.
6. Adjust the lighting of the effect as follows:
• Press Lighting on the S&T WARP Menu.
Globe (Lighting) — S&T WARP Menu
•Use the Type knob on the S&T WARP Menu to select the type of light source that
will be applied to the globe. You can choose between the following:
› None — Select this option to turn off the lighting.
› Natural — Select this option to use a natural looking light source.
› White — Select this option to use a harsh, white light source.
•Use the Highlight knob on the S&T WARP Menu, or the positioner, to adjust the
brightness of the light.
•Use the Shadow knob on the S&T WARP Menu, or the positioner, to adjust the
amount of shadow.
To Next Page
Loading...
