SATO CL4NX Plus User Manual

237
Enabled
Feed the media when changing to Online mode after recovering from an error.
Disabled
Do not feed the media when changing to Online mode after recovering from an error.
However, if [Feed At Power On] is set to [Enabled], the product feeds the media when it is
powered on and changes to Online mode.
[Feed At Power On]
Set whether to automatically feed the media when the product is powered on.
The options are as follows:
Enabled
Feed the media when the product is powered on.
Disabled
Do not feed the media when the product is powered on.
However, if [Feed After Error] is set to [Enabled], the product feeds the media when it is powered
on and changes to Online mode.

SATO CL4NX Plus Specifications

General

Display type	LCD
Product color	Black
Built-in display	Yes
Display diagonal	3.5 \
Type	POS printer
Color	No
Print speed	14 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	305 x 305 DPI
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Maximum media length	600 mm
Maximum roll diameter	254 mm
Supported paper width	39.5 - 128 mm
Maximum printing width	128 mm
Printing media thickness	0.06 - 0.268 µm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Wi-Fi	-
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0+HS
Standard interfaces	Bluetooth, Ethernet, RS-232C, Serial, USB 2.0
Serial interface type	RS-232C
USB 2.0 ports quantity	3
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	271 mm
Width	457 mm
Height	321 mm
Weight	15100 g