287
[Port1]
Set the port number of Port1.
For the two-port connection of Status4, this port is used for receiving print data. For the one-port
connection of Status3/Status5, this port is used for both receiving print data and returning the product
status.
The setting range is from 1 to 65535.
• Each port (1, 2 and 3) must be set to different values.
• Set a port number not used by other services. If port numbers that overlap with those
used by other services are used, communication cannot be performed properly.
[Port2]
Set the port number of Port2.
For the two-port connection of Status4, this port is used for returning the product status.
The setting range is from 1 to 65535.
• Each port (1, 2 and 3) must be set to different values.
• Set a port number not used by other services. If port numbers that overlap with those
used by other services are used, communication cannot be performed properly.
To Next Page
Loading...
