[Network]
286
Status4 Cyclic Response
Set the interval for the cyclic status response.
◦ Available only if you have selected [Status4] in the [Flow Control] menu.
BCC
Set the BCC check function.
◦ Appears only if you have selected [Status5] in the [Flow Control] menu.
Roles of Port1 to Port3
In the socket server function of TCP/IP, either of the following connection methods can be used.
The ports to be used and their roles change depending on the connection method and communication
protocol.
Two-port connection
Port1 is used for receiving print data, and Port2 is used for returning the product status.
Two-port connection is available when the communication protocol is Status4.
One-port connection
One port is used for both receiving print data and returning the product status.
When the communication protocol is Status4, Port3 is used.
When the communication protocol is Status3 or Status5, Port1 or Port3 is used.
To Next Page
Loading...
