SATO CL4NX Plus - Page 285

285
[Ports]
Set the TCP/IP port number.
The setting items are as follows:
Port1
Set the port number of Port1.
For the two-port connection of Status4, this port is used for receiving print data. For the one-port
connection of Status3/Status5, this port is used for both receiving print data and returning the
product status.
Port2
Set the port number of Port2.
For the two-port connection of Status4, this port is used for returning the product status.
Port3
Set the port number of Port3.
For the one-port connection of Status3/Status4/Status5, this port is used for both receiving print
data and returning the product status.
Flow Control
Set the communication protocol.
TCP Connection Queue
Set whether to allow queuing for connection when multiple hosts or applications are sending
connection requests to the product.
Legacy Status for Port 9100
Set whether to change the return status format of Port3 to legacy status.
◦ Does not appear if you have selected [None] in the [Flow Control] menu.
ENQ Reply Delay
Set the period to delay status reply to status request ENQ.
◦ Not available if you have selected [Status4] in the [Flow Control] menu.