325
[MQTT Protocol] (SOS users only)
Set the communication method for MQTT.
Appears only if you have selected [Real-Time] in the [SOS Mode] menu.
The options are as follows:
MQTT
Set when performing MQTT communication by using 443 and 8883 ports.
MQTT over WebSocket
Set when performing MQTT communication by using only 443 port. The proxy server cannot be
used.
[Add Device] (SOS users only)
Shows the serial number and association code that are necessary when adding the product to SOS
(SATO Online Services).
Appears if you have selected other than [Disabled] in the [SOS Mode] menu.
• To add a product to SOS, refer to the Printer setup manual.
https://www.sato-sos.com/en/support/index.html#print_preparation_manual
To Next Page
Loading...
