[External I/O]
374
TYPE1
20 ms "LOW" pulse will be provided after the completion of print and dispense for the Print End
signal (PREND).
TYPE2
20 ms "HIGH" pulse will be provided after the completion of print and dispense for the Print End
signal (PREND).
TYPE3
The Print End signal (PREND) will be "LOW" during label printing and feed forwarding.
TYPE4
The Print End signal (PREND) will be "HIGH" during label printing and feed forwarding.
• For details, refer to the Timing Charts.
[Inputs]
Assign the pin No. to the input signals Print Start and Reprint.
Press the / buttons to highlight the item that you want to change, and press the /
buttons to change the pin No.
Press the button to save the settings and return to the [Signals] menu.
The setting items are as follows:
Start Print
Assign the pin No. for the Print Start signal input.
The options are as follows:
[PIN 5] Assign Pin 5 to the Print Start signal.
[PIN 7] Assign Pin 7 to the Print Start signal.
To Next Page
