SATO CL4NX Plus - Page 375

375
Reprint
Assign the pin No. for the Reprint signal input.
The options are as follows:
[PIN 5] Assign Pin 5 to the Reprint signal.
[PIN 7] Assign Pin 7 to the Reprint signal.
• You cannot set any inputs using the same pin number. If you attempt to set the same
number, the settings will be shown in red and you cannot save the settings.
[Outputs]
Assign the pin No. to output signals.
Press the / buttons to highlight the item that you want to change, and press the /
buttons to change the pin No.
Press the button to save the settings and return to the [Signals] menu.
The setting items are as follows:
Paper End
Assign the pin No. for the Paper End signal output.
Ribbon End
Assign the pin No. for the Ribbon End signal output.
Machine Error
Assign the pin No. for the Machine Error signal output.
Print Done
Assign the pin No. for the Print Done signal output.
Qty