[SDPL]
418
When the specified period of type passes, the product exits from binary receiving mode and scans for
SDPL commands.
The setting range is from 0 (off) to 9999 ms.
[Blank Item Feed]
Set whether to feed a label with nothing printed on it when the product receives label formatting
commands that do not generate any printable image.
The options are as follows:
Enabled
Feeds a label with nothing printed on it.
Disabled
Does not feed a label with nothing printed on it.
[Prioritize]
Select the settings to be prioritized for each setting item of the SDPL command. You can set whether
to prioritize settings that are done through the product or through commands.
When you select [Settings] for an item, the setting specified in the [SDPL] menu of the product will be
used.
To Next Page
Loading...
