419
The setting items are as follows:
Format Attribute
Select the setting to be prioritized for the format attribute.
Pause Mode
Select the setting to be prioritized for pause mode.
1 Byte Codepage
Select the setting to be prioritized for the 1 byte code page.
SDPL Measure Unit
Select the setting to be prioritized for the measurement unit.
Scalable Font Style
Select the setting to be prioritized for the scalable font style.
Sensor Type
Select the setting to be prioritized for the sensor type.
Feedback Character
Select the setting to be prioritized for the feedback character.
SOH Commands
Select the setting to be prioritized for the SOH commands.
Module Selection
Select the setting to be prioritized for the module selection.
Darkness
Factory Offset
Speed
The option selected in the [Printing] > [Advanced] > [Prioritize] menu is applied to these three
settings and shown on this screen.
[Format Attribute]
To Next Page
Loading...
