SATO CL4NX Plus - Page 425

425
• [Transparent]
• [Opaque]
• [Inverse]
[Pause Mode]
Enable or disable the pause mode.
You can change this setting if you have selected [Settings] in the [Prioritize] > [Pause Mode] menu.
The options are as follows:
Enabled
Enable the pause mode.
Disabled
Disable the pause mode.
[1 Byte Codepage]
Select the code page to be used for one-byte characters from the list.
You can change this setting if you have selected [Settings] in the [Prioritize] > [1 Byte Codepage]
menu.