SATO CL4NX Plus - Page 621

621
Item Specification
(1) Media feed direction
(2) Cutter cover
(3) Cut position
(4) Print head
(5) Readable area (for the minimum media pitch)
(6) Unreadable area
(7) Minimum media pitch
Cut & Print mode
Do not print a 2D code or serial barcode (90° or 270° orientation in
relation to the media feed direction) within the following area as it
may cause a white void.
◦ 18 to 23 mm (0.70" to 0.90") from the front end of the label (cut
position)
(1) Media feed direction
(2) Cutter cover
(3) Cut position
(4) Print head
(5) Range in which white voids occur