SATO CL4NX Plus - Page 622

Basic Specifications of the Barcode Check Function
622
Item Specification
Linerless mode
Barcodes printed within a range of 25 mm (0.98") from the trailing
end of the label cannot be read as it is blocked by the cutter cover.
(1) Media feed direction
(2) Cutter cover
(3) Cut position
(4) Print head
(5) Readable area (for the minimum media pitch)
(6) Unreadable area
(7) Minimum media pitch
Media
width
Same as the product specifications.Usable Media
Sizes
Media
Pitch
The minimum size is different from the product specifications.
Continuous mode
◦ 203 dpi: 20 to 2497 mm (0.79" to 98.30") (with liner: 23 to 2500 mm
(0.90" to 98.42"))
◦ 305 dpi: 20 to 1497 mm (0.79" to 58.94") (with liner: 23 to 1500 mm
(0.90" to 59.05"))
◦ 609 dpi: 20 to 397 mm (0.79" to 15.63") (with liner: 23 to 400 mm
(0.90" to 15.75"))
Cutter mode (cutting every label)
◦ 203 dpi: 35 to 2497 mm (1.38" to 98.30") (with liner: 38 to 2500 mm
(1.50" to 98.42"))
◦ 305 dpi: 35 to 1497 mm (1.38" to 58.94") (with liner: 38 to 1500 mm
(1.50" to 59.05"))
◦ 609 dpi: 35 to 397 mm (1.38" to 15.63") (with liner: 38 to 400 mm
(1.50" to 15.75"))
Cutter (cutting according to the specified number of labels)/Cut &
Print mode