LP 100R Laser Printer Operator's Guide Chapter 3: Printer Operation
Rev: 1 Page 3-13 April, 2014
of 32 pages
5. If the configuration number displayed is incorrect, press Recall. See Recall
Configurations starting on page 3-19.
6. If the stock loaded into the printer is incorrect:
a. Tear the stock at a page perforation.
b. Press Feed to clear the stock from the printer.
c. See Document Loading Procedures starting on page 3-30.
7. If the configuration number and stock are both correct, see the LP 100R menu
system procedures that follow.
To Next Page
Loading...
