Sel 751A - Page 275

Date _______________
Date Code 20100129 Instruction Manual SEL-751A Relay
SET.25
of 68
SEL-751A Settings Sheets
Global Settings (SET G Command)
TMB4A :=
TMB5A :=
TMB6A :=
TMB7A :=
TMB8A :=
TMB1B :=
TMB2B :=
TMB3B :=
TMB4B :=
TMB5B :=
TMB6B :=
TMB7B :=
TMB8B :=
Global Settings (SET G Command)
General
PHASE ROTATION (ABC, ACB) PHROT :=
RATED FREQ. (50, 60 Hz)
FNOM :=
DATE FORMAT (MDY, YMD, DMY)
DATE_F :=
FAULT CONDITION (SEL
OGIC) FAULT :=
EVE MSG PTS ENABL (N, 1–32)
EMP :=
Event Messenger Points (Only the points enabled by EMP are visible)
MESSENGER POINT MP01 TRIGGER (Off, 1 Relay Word bit) MPTR01 :=
MESSENGER POINT MP01 AQ (
None, 1 analog quantity) MPAQ01 :=
MESSENGER POINT MP01 TEXT (
148 characters) MPTX01 :=
MESSENGER POINT MP02 TRIGGER (
Off, 1 Relay Word bit) MPTR02 :=
MESSENGER POINT MP02 AQ (
None, 1 analog quantity) MPAQ02 :=
MESSENGER POINT MP02 TEXT (
148 characters) MPTX02 :=
MESSENGER POINT MP03 TRIGGER (
Off, 1 Relay Word bit) MPTR03 :=
MESSENGER POINT MP03 AQ (
None, 1 analog quantity) MPAQ03 :=
MESSENGER POINT MP03 TEXT (
148 characters) MPTX03 :=
MESSENGER POINT MP04 TRIGGER (
Off, 1 Relay Word bit) MPTR04 :=
MESSENGER POINT MP04 AQ (
None, 1 analog quantity) MPAQ04 :=
MESSENGER POINT MP04 TEXT (
148 characters) MPTX04 :=