Sel 751A - Page 306

SET.56
of 68
SEL-751A Settings Sheets
Modbus Map Settings (SET M Command)
SEL-751A Relay Instruction Manual Date Code 20100129
Date________________
ALIAS19 ALIAS19 :=
ALIAS20
ALIAS20 :=
Event Report
EVENT TRIGGER (SELOGIC) ER :=
EVENT LENGTH (15,64 cyc)
LER :=
PREFAULT LENGTH (1–59 cyc {if LER := 15}, 1–10 cyc
{if LER := 64})
PRE :=
Load Profile
LDP LIST (NA, Up to 17 Analog Quantities) LDLIST :=
LDP ACQ RATE (5, 10, 15, 30, 60 min.)
LDAR :=
Modbus Map Settings (SET M Command)
Modbus User Map
(See Appendix E: Modbus RTU Communications for
additional details)
User Map Register Label Name (8 characters)
MOD_001 :=
User Map Register Label Name (8 characters)
MOD_002 :=
User Map Register Label Name (8 characters)
MOD_003 :=
User Map Register Label Name (8 characters)
MOD_004 :=
User Map Register Label Name (8 characters)
MOD_005 :=
User Map Register Label Name (8 characters)
MOD_006 :=
User Map Register Label Name (8 characters)
MOD_007 :=
User Map Register Label Name (8 characters)
MOD_008 :=
User Map Register Label Name (8 characters)
MOD_009 :=
User Map Register Label Name (8 characters)
MOD_010 :=
User Map Register Label Name (8 characters)
MOD_011 :=
User Map Register Label Name (8 characters)
MOD_012 :=
User Map Register Label Name (8 characters)
MOD_013 :=
User Map Register Label Name (8 characters)
MOD_014 :=
User Map Register Label Name (8 characters)
MOD_015 :=
User Map Register Label Name (8 characters)
MOD_016 :=
User Map Register Label Name (8 characters)
MOD_017 :=
User Map Register Label Name (8 characters)
MOD_018 :=
User Map Register Label Name (8 characters)
MOD_019 :=