Sel 751A - Page 417

A.9
Date Code 20100129 Instruction Manual SEL-751A Relay
Firmware and Manual Versions
Instruction Manual
Section 4
➤ Added information regarding commenting in SELOGIC Control Equation Operators.
➤ Added Digital Input Debounce section.
➤ Updated Port 2 information in Port Settings (SET P Command).
➤ Updated title in Table 4.40: Ethernet Port Settings.
Section 6
➤ Added Input Debounce Settings to SEL-751A Settings Sheets.
Section 7
➤ Updated Table 7.1: SEL-751A Communication Port Interfaces, Table 7.31: PASSWORD Command, and
Table 7.32: PAS Command Format.
Section 8
➤ Updated Configurable Label information in Programmable LEDs.
Section 9
➤ Updated Figure 9.3: Example Standard 15-Cycle Event Report 1/4-Cycle Resolution.
Section 10
➤ Removed Low-Level Test Interface.
➤ Updated Table 10.7: Relay Self-Tests.
Appendix A
➤ Updated for firmware version R101.
20070410 Note: The initial version was not released from the factory.
Table A.6 Instruction Manual Revision History (Sheet 5 of 5)
Revision Date Summary of Revisions