1-Pole Triggering
[dw1polig-020211-01.tif, 1, en_US]
Figure 8-8 1-Pole Triggering
[scrang1pLS1p, 1, en_US]
Figure 8-9
1-Pole Triggering, Routing in DIGSI
You can select the contacts for On and Off as desired. They need not necessarily be next to one another. The
letter U represents an unlatched command. Alternatively, TL (latched tripping) can be selected.
Control Functions
8.2 Switching Devices
SIPROTEC 5, Overcurrent Protection, Manual 1085
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
