Siemens 7SJ85 - Structure of the Function Group

[scfgcasd-300414-01, 2, en_US]
Figure 5-29
Capacitor Bank Side Function Group - Functional Scope
For more information about the embedding of the functions in the device, refer to chapter 2 Basic Structure of
the Function. For application templates for the various device types, refer to chapter 4 Applications.
Structure of the Function Group
The Capacitor bank side function group always contains the following function blocks:
•
Side-dependent capacitor-bank data
•
Operational measured values
•
Process monitor
•
Output logic of the function group
These blocks are required for the Capacitor bank side function group and therefore cannot be loaded or
deleted.
You can load the protection and supervision functions required for your application in the Capacitor bank
side function group. The functions are available in the Global DIGSI 5 library. Functions that are not needed
can be deleted from the function group.
5.5.3.2
Function-Group Types
5.5 Function-Group Type Capacitor Bank Differential Protection
SIPROTEC 5, Overcurrent Protection, Manual 229
C53000-G5040-C017-8, Edition 07.2017