EasyManua.ls Logo

Siemens 7SJ85 - Information List

Siemens 7SJ85
1638 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Addr. Parameter C Setting Options Default Setting
_:4891:17 Inverse-T 1:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 1.200 A
5 A @ 100 Irated 0.15 A to 175.00 A 6.00 A
1 A @ 50 Irated 0.030 A to 35.000 A 1.200 A
5 A @ 50 Irated 0.15 A to 175.00 A 6.00 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 1.200 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 6.000 A
_:4891:105 Inverse-T 1:Time dial 0.00 to 15.00 1.00
Dyn.s: Cold load PU
_:4891:33 Inverse-T 1:Effect. b.
cold-load pickup
no
yes
no
_:4891:40 Inverse-T 1:Stage
blocked
no
yes
no
_:4891:18 Inverse-T 1:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 1.200 A
5 A @ 100 Irated 0.15 A to 175.00 A 6.00 A
1 A @ 50 Irated 0.030 A to 35.000 A 1.200 A
5 A @ 50 Irated 0.15 A to 175.00 A 6.00 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 1.200 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 6.000 A
_:4891:106 Inverse-T 1:Time dial 0.00 to 15.00 1.00
Dyn.set: bin.input
_:4891:34 Inverse-T 1:Effected by
binary input
no
yes
no
_:4891:41 Inverse-T 1:Stage
blocked
no
yes
no
_:4891:19 Inverse-T 1:Threshold 1 A @ 100 Irated 0.030 A to 35.000 A 1.200 A
5 A @ 100 Irated 0.15 A to 175.00 A 6.00 A
1 A @ 50 Irated 0.030 A to 35.000 A 1.200 A
5 A @ 50 Irated 0.15 A to 175.00 A 6.00 A
1 A @ 1.6 Irated 0.001 A to 1.600 A 1.200 A
5 A @ 1.6 Irated 0.005 A to 8.000 A 6.000 A
_:4891:107 Inverse-T 1:Time dial 0.00 to 15.00 1.00
Information List
No.
Information Data Class
(Type)
Type
Inverse-T 1
_:4891:81 Inverse-T 1:>Block stage SPS I
_:4891:501 Inverse-T 1:>Release delay & op. SPS I
_:4891:84 Inverse-T 1:>Activ. dyn. settings SPS I
_:4891:500 Inverse-T 1:>Block delay & op. SPS I
_:4891:54 Inverse-T 1:Inactive SPS O
_:4891:52 Inverse-T 1:Behavior ENS O
_:4891:53 Inverse-T 1:Health ENS O
_:4891:60 Inverse-T 1:Inrush blocks operate SPS O
_:4891:62 Inverse-T 1:Dyn.set. AR cycle1act. SPS O
_:4891:63 Inverse-T 1:Dyn.set. AR cycle2act. SPS O
_:4891:64 Inverse-T 1:Dyn.set. AR cycle3act. SPS O
_:4891:65 Inverse-T 1:Dyn.set. ARcycl.>3act SPS O
6.7.6.4
Protection and Automation Functions
6.7 Directional Overcurrent Protection, Ground
468 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017

Table of Contents

Related product manuals