Siemens 7SJ85 - Prerouting 7 SJ82;85 Capacitor Bank Applications

Prerouting 7SJ82/85 Capacitor Bank Applications
Meaning of the abbreviations in DIGSI, see8.2.2.3 Connection Variants of the Circuit Breaker
Binary Inputs
Table A-11 Default Binary Inputs, Using the Example of Overcurrent Protection
Binary input Signal Number Signal type Configuration
BI1 Circuit breaker
1:Circuit
break.:Position
201.4261.58 DPC OH
BI2 Circuit breaker
1:Circuit
break.:Position
201.4261.58 DPC CH
Binary Outputs
Table A-12 Default Output Relays, Using the Example of Overcurrent Protection
Binary output Signal Number Signal type Configuration
BO1 Circuit breaker
1:Circuit
break.:Trip/open
cmd.
201.4261.300 SPS U
BO2 Circuit breaker
1:Circuit
break.:Close
command
201.4261.301 SPS X
Function Keys
Table A-13
Default Setting Function Key Using the Example of Overcurrent Protection
Function key Signal Number Signal type Configu-ration
F-key1 Main
menu:Logs:Opera-
tional log
X
F-key2 Main menu:Meas-
urements :Capacitor
bank 1:Operational
values
X
F-key3 Main
menu:Logs:Fault log
X
Light-Emitting Diodes
Table A-14
Default LED Displays, Using the Example of Overcurrent Protection
LEDs Signal Number Signal type Configura-tion
LED1 Capacitor bank 1:Group
indicat.:Pickup:phs A
SPS NT
LED2 Capacitor bank 1:Group
indicat.:Pickup:phs B
SPS NT
A.11
Appendix
A.11 Prerouting 7SJ82/85 Capacitor Bank Applications
1612 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017