2-Pole Triggering
[dw2polan-020211-01.tif, 1, en_US]
Figure 8-12 2-Pole Triggering
[scrang1pLS13p, 1, en_US]
Figure 8-13
2-Pole Triggering, Routing in DIGSI
Connection Variant: 1-Pole Circuit Breaker
The 1-pole circuit breaker is used for separate activation and acquisition of the individual poles of a circuit
breaker. It is intended for common use by 1-pole working protection and control functions.
NOTE
The wiring of the Circuit-breaker function group with binary inputs and binary outputs occurs once per
device .
The control function in this type switches all 3 poles on or off simultaneously.
Control Functions
8.2 Switching Devices
SIPROTEC 5, Overcurrent Protection, Manual 1087
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
