ANSI Function Abbr.
Available in 7SJ82
Available in 7SJ85
Template 1
Template 2
Template 3
Template 4
Template 5
Template 6
Template 7
81R Rate of frequency change protection df/dt x x
Vector-jump protection x x
86 Lockout x x 4 4 4 4 x x x
87C Capacitor bank differential protection x x x
87V Voltage differential protection ΔV x
87N Restricted ground-fault protection ΔIN x x
90V Voltage controller x x
Arc
Prot
Arc protection x x
DIGFP Directional intermittent ground-fault
protection
x x
IGFP Intermittent ground-fault protection x x
FL Fault locator, single-ended measure-
ment
FL-one x x
PMU Synchrophasor measurement PMU x x
SOTF Instantaneous tripping at switch onto
fault
SOTF x x x x x x
Monit Circuit-breaker wear monitoring x x
VSEL Voltage measuring-point selection x x
20mA
MT
20-mA unit Ethernet x x
20mA
MS
20-mA unit serial x x
RTDMT RTD unit Ethernet x x
RTDMS RTD unit Serial x x
Signaling-voltage supervision x x
Measuring-voltage failure detection x x x x
Switch onto fault x x x x x x
CB Test x x x x x x x x x
Interlocking x x 4 4 4 4 x x x
I-jump detection x x
V-jump detection x x
Pulse metered value x x
Measured values, standard x x x x x x x 2 x
User-defined function block x x
Measured values, extended: Min, Max,
Avg
x x
Switching statistic counters x x
CFC standard and control x x x x x x x x x
CFC arithmetic x x
Switching sequences function x x
Inrush-current detection x x x x x x
External trip initiation x x
Applications
4.2 Application Templates and Functional Scope for the Devices 7SJ82/7SJ85
192 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
