Proceed as follows:
•
Determine the function point requirement of certain functions, for example, with DIGSI 5 or the
SIPROTEC 5 Configurator.
•
Order the additional function points from your local distributor or at http://www.energy.siemens.com.
•
Siemens will provide you with a signed license file for your device, either via e-mail or for downloading.
•
Use DIGSI 5 to load the signed license file into your device. The procedure is described in the Online Help
of DIGSI 5.
Basic Structure of the Function
2.2 Adjustment of Application Templates/Functional Scope
52 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
To Next Page
Loading...
