6 | 188
21.16 Delete the device on Person Machine Interface ......................................... 86
21.17 Remove the elements ................................................................................ 86
21.18 Testing detectors ....................................................................................... 87
21.18.1 Activate the detector ................................................................... 87
21.18.2 Testing logged test activations .................................................... 87
21.19 Using a detector exchanger and tester or an intelligent detector tester ....... 88
21.20 Switching on test mode .............................................................................. 89
21.21 Switch on normal operation........................................................................ 90
21.22 Rectify localization errors ........................................................................... 91
21.23 Checking 'Site' function .............................................................................. 91
21.24 Carrying out final commissioning work ....................................................... 91
22 Commissioning Ethernet switch (MM) FN2008-A1...................................92
22.1 Install Primary Setup Tool .......................................................................... 92
22.2 Assign IP address ...................................................................................... 93
22.3 Configuring FN2008-A1 using Internet browser .......................................... 94
23 Commissioning security module (firewall) FN2009-A1 .............................95
23.1 Installing Security Configuration Tool ......................................................... 96
23.2 Selecting type and entering MAC address.................................................. 97
23.3 Entering network settings ........................................................................... 98
23.4 Creating IP service definitions .................................................................. 100
23.5 Creating firewall rules .............................................................................. 101
24 Commissioning Ethernet switch (modular) FN2012-A1 .......................... 103
24.1 Standalone FN2012-A1 ........................................................................... 103
24.1.1 Specifying a pre-configured IP address ..................................... 104
24.2 FN2012-A1 integrated into station ............................................................ 105
24.3 FN2012-A1 web interface ........................................................................ 106
24.3.1 Commissioning a web interface ................................................. 106
24.3.2 Changing the IP address ........................................................... 107
24.3.3 Configuring the redundancy role ............................................... 108
24.3.4 Activating/deactivating local ports.............................................. 108
24.3.5 Activating fault monitoring for local ports ................................... 109
24.3.6 Activating port mirroring ............................................................ 109
24.4 Restarting and resetting the FN2012-A1 .................................................. 110
25 Commissioning the sounder base FDSB291......................................... 111
26 Commissioning the fire brigade periphery module FCI2001-D1 ............... 112
27 Commissioning of I/O card (remote transmission) FCI2007-A1
and I/O card (horn/monitored) FCI2009-A1........................................... 113
28 Commissioning external printer ........................................................... 114
To Next Page
Loading...
