Siemens SCALANCE W1750D UI User Manual

Wireless Network Profiles
11.2 Configuring Fast Roaming for Wireless Clients
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
141
11.2.4
BSS Transition Management (802.11v)
The 802.11v standard provides Wireless Network Management enhancements to the IEEE
802.11 MAC and PHY. It extends radio measurements to define mechanisms for wireless
network management of stations including BSS transition management.
APs support the generation of the BSS transition management request frames to the
802.11k clients when a suitable AP is identified for a client through Client Match.
Configuring a WLAN SSID for 802.11v Support
You can enable 802.11v support on a WLAN SSID by using the SCALANCE W UI or the
CLI.
In the SCALANCE W UI
1. Navigate to the WLAN wizard (Go to
Network > New
OR Go to
Network > WLAN SSID
and click
edit
).
2. Click the
Security
tab.
3. Under
Fast Roaming
, select the
802.11v
check box.
4. Click
Next
and then click
Finish
.
In the CLI
To enable 802.11v profile
:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# dot11v
(scalance) (config)# end
(scalance)# commit apply
Example
(scalance)(config)# wlan ssid-profile dot11v-profile
(scalance)(SSID Profile "dot11v-profile")# dot11v
(scalance)(config)# end
(scalance)# commit apply

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English